:: Bersa Talk ::

What does de-horning mean exactly? Is it recommended? Does it affect warranty?

---

NO, YOU CAN'T TAKE AWAY MY RIGHTS. I AM STILL USING THEM!

Kimber Pro-carry II - 0.45.
Glock17.
Bersa Thunder 380
Marlin 60 0.22
Browning BPS 12GA
HiPoint 995 w/ATI stock

NRA Member

All the sharp edges are rounded and smoothed out.  I don't think it's possible on the aluminum framed pistols.  I also think it would be difficult to do the slides for much of the Thunder line since the slides would have to be re-nickel plated or re-coated with whatever the coating is on the matte and duo-tone versions.

Bronson

---

"Anybody worth shooting is worth shooting five to seven times"
--------------------------
Thunder .380
Browning HiPower
Kahr CW40
Kel-Tec P32
Ruger MK I
Ruger GP100
S&W 60

Thanks Bronson

---

NO, YOU CAN'T TAKE AWAY MY RIGHTS. I AM STILL USING THEM!

Kimber Pro-carry II - 0.45.
Glock17.
Bersa Thunder 380
Marlin 60 0.22
Browning BPS 12GA
HiPoint 995 w/ATI stock

NRA Member

Thank god you answered Bronson. I was about to go into what it ment to get dehorned back in the old days. 

---

Bersa Talk isn't perfect.. But we are perfecting the art of imperfection...

I've used a Dremel tool with a rubber polishing wheel in the past with good results.  It gets rid of burrs, sharp edges, and smoothes out loading ramps and linkages.  I don't think it would void your warranty.

---

"A strong body makes the mind strong. As to the species of exercises, I advise the gun. While this gives moderate exercise to the body, it gives boldness, enterprise and independence to the mind. Let your gun therefore be the constant companion of your walks." Thomas Jefferson

Just be advised that the frames on the Thunder line are anodized aluminum.  Once you compromise the anodizing you have bare aluminum exposed to the elements and that means corrosion.

Bronson

---

"Anybody worth shooting is worth shooting five to seven times"
--------------------------
Thunder .380
Browning HiPower
Kahr CW40
Kel-Tec P32
Ruger MK I
Ruger GP100
S&W 60

Don't touch feed ramp on Bersa with anything other than  bullets . Their ok .

Take dremel out to drive way and run over 3 or 4 times make sure really crushed. Been more guns runined  by dremel and home gunsmithing . 1911's worst for this. In case of those I think owner should have wire brush and dremel running max shove up  their .................. 

---

"Just say "Lay A Way"

"WWJBD" What Would James Bond Do?

"Hokey religions and plastic glocks are no match for a good 1911 at your side, kid."

NO !!!   Don't run over them in the driveway......just pack them up and send them to me. I can use them for carving in antler and such. They can be very destructive sometimes. Even bite occasionally.

I use my dremel to shave... and some lite dental work!

---

Bersa Talk isn't perfect.. But we are perfecting the art of imperfection...